Juniper CBL-PWR-C15M-HITEMP-SZ Standard Power Cord

Juniper CBL-PWR-C15M-HITEMP-SZ Standard Power Cord - For Router - 12 Gauge - 250 V AC / 10 A - 8.20 ft Cord Length - SEV 1011 / SEV 6534-2 - Switzerland (part number CBL-PWR-C15M-HITEMP-SZ) is supplied by Uniqcli, an authorized HPE & Juniper partner, in the Juniper Power Cords category. First End Connector Type: SEV 1011.

Each AC power supply has a single AC appliance inlet that requires a dedicated AC power feed. Most sites distribute power through a main conduit that leads to frame-mounted power distribution panels, one of which can be located at the top of the rack that houses the router. An AC power cord connects each power supply to the power distribution panel. You can order detachable AC power cords, each approximately 8 ft (2.5 m) long that supply AC power to the router. The C15 appliance coupler at the female end of the cord, as described by International Electrotechnical Commission (IEC) standard 60320, inserts into the AC appliance inlet coupler. The plug at the male end of the power cord fits into the power source receptacle that is standard for your geographic location.

• Powers your devices with ease by connecting to available power outlets • SEV 1011 first end connector type for maximum connection productivity and efficiency • SEV 6534-2 second end connector type for a secure, worry-free operation • 12 gauge to ensure maximum usability and reliable power flow • With 250 V AC cord, never run out of power and keep your device operational at all times

Key specifications: First End Connector Type: SEV 1011 · Second End Connector Type: SEV 6534-2 · Device Supported: Router · Localization: Switzerland · Cord Length: 8.20 ft mm · Voltage Rating: 250 V AC · Current Rating: 10 A A · Compatibility: Juniper ACX4000 Universal Access Router.

GPC-payable, with SAP, FAR-based purchase orders, and GSA eBuy support. Ask us about TAA-compliant configurations, current pricing, stock, and lead time.