Juniper CBL-PWR-C15M-HITEMP-IL Standard Power Cord

Juniper CBL-PWR-C15M-HITEMP-IL Standard Power Cord - For Router - 250 V AC / 10 A - 8.20 ft Cord Length - IEC 60320 C15 / SI32 - Israel (part number CBL-PWR-C15MHITEMPIL) is supplied by Uniqcli, an authorized HPE & Juniper partner, in the Juniper Power Cords category. First End Connector Type: IEC 60320 C15.

Each AC power supply has a single AC appliance inlet that requires a dedicated AC power feed. Most sites distribute power through a main conduit that leads to frame-mounted power distribution panels, one of which can be located at the top of the rack that houses the router. An AC power cord connects each power supply to the power distribution panel. You can order detachable AC power cords, each approximately 8 ft (2.5 m) long that supply AC power to the router. The C15 appliance coupler at the female end of the cord, as described by International Electrotechnical Commission (IEC) standard 60320, inserts into the AC appliance inlet coupler. The plug at the male end of the power cord fits into the power source receptacle that is standard for your geographic location.

• This standard power cord provides splendid performance and clear connectivity • IEC 60320 C15 first end connector type for reliable data transfer and enhanced connectivity and optimal performance • SI32 second end connector type for a secure, worry-free operation • With 250 V AC cord, never run out of power and keep your device operational at all times • Helps you keep your device charged, up and running

Key specifications: First End Connector Type: IEC 60320 C15 · First End Connector Detail: IEC 60320 C15 Female · Second End Connector Type: SI32 · Device Supported: Router · Localization: Israel · Cord Length: 8.20 ft mm · Voltage Rating: 250 V AC · Current Rating: 10 A A.

GPC-payable, with SAP, FAR-based purchase orders, and GSA eBuy support. Ask us about TAA-compliant configurations, current pricing, stock, and lead time.