HPE Comware 5150 HI Ethernet Switch

HPE Comware 5150 HI Ethernet Switch - 32 Ports - Gigabit Ethernet, 25 Gigabit Ethernet - 10/100/1000Base-T, 25GBase-X, 1000Base-X - 3 Layer Supported - 61 W Power Consumption - Twisted Pair, Optical Fiber (part number S5T46A) is supplied by Uniqcli, an authorized HPE partner, in the HPE Switches & Bridges category. Maximum Data Transfer Rate: 3.13 GB/s Bps.

The HPE Networking Comware Switch Series 5150 HI is a family of stackable L3 access switches powered by HPE Comware 9 delivering scalability and resiliency for medium and large enterprise campus networks. With 24 and 48 MACsec-256 enabled 1 GbE downlink ports, 6x10/25 GbE uplinks, hot swappable dual power and fans, and up to 90 watts of 802.3bt PoE per port, this flexible series delivers security and performance for your clients, servers, and IoT devices. Intelligent Resilient Fabric (IRF) stacking up to 9 members adds scale and high availability while Intelligent Network Quality Analyzer (iNQA) supports real-time visibility into network health and performance Network visibility, management, and operation tools for this series include standard CLI and the Smart Management Center (SmartMC), embedded and ready to use at no additional cost. The series integrates with HPE Aruba Networking IMC, delivering a centralized point of control for your entire network. Features | Scalable L3 Access Switches The HPE Networking Comware Switch Series 5150 HI delivers scalability and enhances reliability of the network with Intelligent Resilient Framework (IRF) technology. IRF stacking enables virtual resilient switching fabrics for simpler, flatter, and more agile networks. Supports 10 GbE uplinks, static and RIP routing, PoE+, ACLs, and IPv6 for improved and costeffective network performance. DRNI enables link aggregation from multiple switches to implement device-level link backup for node redundancy. DRNI also simplifies network topology by virtualizing two physical devices into a logical device. iNQA helps in measuring network packet loss performance, forward, reverse, and two-way packet loss, including lost number of messages and bytes, message loss, and byte loss rate. Dual, redundant, hot-swappable power supplies maintain a dynamic and highly available network switch, delivering up to 90W of 802.3bt standards compliant power for cameras, phones, and wireless access points. Performance with Quality of Service (QoS) The HPE Networking Comware Switch Series 5150 HI is engineered with nonblocking architecture for low-latency switching. It supports advanced classifier based Quality of Service (QoS) to group traffic, set priority levels, and rate limit selected traffic on a port, VLAN, or entire switch. Provides extensive traffic prioritization with strict priority (SP) queuing, weighted round robin (WRR), and SP+WRR. Broadcast control and limitation of broadcast traffic rate can reduce unwanted network traffic and preserve more bandwidth for critical data. Energy Efficient Ethernet and energy-saving green design initiatives support your sustainability efforts by automatically reducing power to idle ports and powering down unused ports. Security with Comprehensive Control HPE Networking Comware Switch Series 5150 HI supports flexible authentication methods including 802.1X, MAC Authentication and Encryption for greater device security and policy-driven app authentication. Per-user Access Control Lists (ACLs) provide identity-driven security and access control. Dynamic ARP protection with functions such as ARP Detection and ARP packet validation blocks broadcast from unauthorized hosts and prevents eavesdropping or theft of network data. Supports industry-standard MACsec 256 encryption for end-to-end data link layer security, providing increased MAC port binding and link group capacity.

• Effectively increases available bandwidth on your network • Cascade to other network devices through the uplink port to expand your local area network • Features 32 networking ports to establish large network • Can work as layer 3 routing for scalable network design • Up to 10x faster than standard Ethernet server connectivity while providing high-performance uplinks

Key specifications: Maximum Data Transfer Rate: 3.13 GB/s Bps · Ethernet Technology: Gigabit Ethernet, 25 Gigabit Ethernet · Media Type Supported: Twisted Pair, Optical Fiber · Network Technology: 10/100/1000Base-T, 25GBase-X, 1000Base-X · Network (RJ-45): Yes · Uplink Port: Yes · Total Number of Network Ports: 32 · Port/Expansion Slot Details: 24 x Gigabit Ethernet Network, 8 x 100/1000BASE-X SFP Combo Ports, 6 x 25 Gigabit Ethernet Expansion Slot.

GPC-payable, with SAP, FAR-based purchase orders, and GSA eBuy support. Ask us about TAA-compliant configurations, current pricing, stock, and lead time.